CAMARO VORTEX RAM INDUCTION SYSTEM 2010-2014
CAMARO VORTEX RAM INDUCTION SYSTEM 2010-2014

CAMARO VORTEX RAM INDUCTION SYSTEM 2010-2014


Product Code: CAMM14

Price: $0.00

In Stock: 100 
Quantity: Add to Basket

 

CAMARO VORTEX RAM INDUCTION SYSTEM 2010-2014

 

 

 

 

 

 

1.    Loosen the throttle body clamp, remove the 3/8 air tubeand nipple, Remove the mass air sensor plug and remove the nut that hold the factory box down to the fender.

 

 

 

 

   

 

 

 

 

 

 

 

 

2.    Grasp the stock air intake assembly and lift it up and set it aside.

 

 

 

 

3.     Remove the Mass Air Sensor by removing the 2 screws reinstall the sensor onto the new powertube. Make sure the arrow is pointing toward the airflow direction.

 

 

 

 

4.     

 

 

 

 

5.   

 

 

 

 

6.     

 

 

 

 

7.    Cut the air tube as you see in the picture and add the small 3/8 rubber hose to put it back together. This is to rotate the tube in the position you need. Take the new Vortex ram induction system and slid it in place. Take the small nipple that you removed from the stock air box and remove the rubber o-ring now insert the nipple into the hole in the silicone coupler tube.

 

 

 

 

8.   

 

 

 

 

9.    Last put the nut back that holds the box in place and tighten. Tighten all the clamps, re- connect the mass air flow sensor and you are done

 

 

 

 

 

 

 

 

Tip: If you like you could trim the plastic cover in front of the radiator the deflects there air flow around the side. By cutting the front section of this shield you will get more of a ram air effect.

 

 

 

 

 

 

 

 

 

 

 

Call us for further information.

 

 

 

 

www.breathlessracing.com

 

 

 

 

954-925-7725

 

 

 

 

 

 
  • Corvette
  • Camaro
  • Firebird
  • Smart
  • Cadillac
  • V-Rod
  • Hummer
  • Mercedes Benz
 
Shopping Basket
Your basket is empty.
0Items in cart:
$0.00Total:
View Basket
 
Powered by CubeCart
Copyright Devellion Limited 2006. All rights reserved.