Z06 LS7 Stage 2

Z06 LS7 Stage 2

Product Code: 700-070

Price: $2500.00

Quantity: Add to Basket



BREATHLESS PERFORMANCE PRODUCTS-  This vortex rammer kit  replaces the restrictive stock air box assembly.  Look closely at the filter and note that this is not the K&N filter that everyone sells.  This revolutionary air cleaner contains an internal vortex velocity stack.  It obtains cool, pressurized air from the radiator cavity through your modified shroud.  Air is forced through a sealed box, where in turn, it directly injects cold air into your intake.  (Lowering Manifold Air Temperature by almost 30 Degrees)

Remember, cold air means more power.  Our HP results have already shown up to 36HP and 38FT/LBS at the flywheel. Running at speed has give an additional up to 10 more Hp due to the air being forced in.. This is from the benefit of the pressurized air that is created at high speeds (which means there will be more h.p. at speeds over 35 MPH. 1/4 mile tests showed 3 MPH and .30 

C6 auto test one showed 26 flywheel HP

C6 stick test two showed 21 flywheel HP

The power duct replaces the stock air bridge between throttle body and MAF.   It increases the air flow to the motor by over thirty three percent.

Our Bridge power duct is made from 100% pure Carbon Fiber 

The kits are available in CLEAR, BLACK .

(Clear finish provides a visual access to your Filter and Radiator for service inspection.)

Note: Z06 model is available with factory MAF already installed.

2. Breathless Ported Throttle Body

Breathless Performance Products’  Ported & Flowed Throttle Body increases CFM flow to match your performance upgrades. Each unit is hand ported, Cleaned, then flowed to over 1000 CFM. A must once mods are done to your car. HP increase depending on mods range between 6-15 HP.

A core charge of $300 would be applied and would be refunded upon receipt of you stock unit.


3.    2005 & Up Corvette 8.5 Spark Plug Wires


MSD 8.5 Super Conductor spark plug wires.

* 40-50 ohms per foot of resistance

*High EMI suppression abilities

* Tough silicone/synthetic sleeve

* Durable, extra thick plug boots

* Dual Crimp terminals grip the wire and conductor


Corvette C5 or C6 Complete Header System. With High Flow Race Cats. Made in 304 Grade Stainless Steel and comes with a life-time warrantee. Available in 1 5/8 to 1 7/8 comes complete with center section X pipe and high flow cats. No ground clearance problems like some other systems out there!!
 Description 2005 & Up  Price
  Specify Year, Model and tube size 
 Dyno results have shown between 19 to 36 HP gains.

#700-030   Price $2500.00

  • Corvette
  • Camaro
  • Firebird
  • Smart
  • Cadillac
  • V-Rod
  • Hummer
  • Mercedes Benz
Shopping Basket
Your basket is empty.
0:
View Basket
Powered by CubeCart
Copyright Devellion Limited 2006. All rights reserved.